Portuguese 
English 
Spanish 
2 min of reading 
7 comments 
Goodbye Paint Roller? Mason Explains Practical Technique for Painting Wall with Sprayer, Saving Time and Ensuring Uniform Finish.
The technique for painting walls with a sprayer has drawn attention from those looking for speed and a good finish in residential painting. The method was presented by a mason in a video published on the channel SOS na Construção, showing how to paint walls and surfaces in less than an hour, using simple and accessible equipment.
The demonstration took place on a residential construction site, where the professional explained how to apply waterproof paint with a sprayer, highlighting time savings, practicality, and efficiency, especially on roughcast or plastered surfaces.
Sprayer Technique Changes the Mason’s Routine
According to the mason, the main advantage of the technique is to replace the traditional method. In other words, it’s truly the “goodbye” to the paint roller for large areas.
-
The lack of welders, electricians, and operators becomes a structural threat in 2025, with the construction industry and manufacturing already suffering from delays, cost pressures, and labor shortages in Brazil.
-
Brazil and Paraguay are just 46 meters away from a historic union on the bioceanic bridge that promises to revolutionize trade between the Atlantic and the Pacific.
-
With 55 km over the sea, a cost of US$ 20 billion, and enough steel to build 60 Eiffel Towers, China’s largest project has connected Hong Kong, Zhuhai, and Macau in a colossal bridge that defies the logic of engineering.
-
A trick with joint compound transforms a Styrofoam ceiling into a plaster-like ceiling: leveled panels, wires and mesh at the joints, sand, paint, and change the environment while spending little today.
With the sprayer, the paint is applied evenly and quickly, reducing physical effort and service time.
Moreover, the professional explains that the tool is ideal for those needing to paint external walls, roughcast walls, raw plaster, or even exposed bricks. Thus, productivity increases without compromising the finish.
Paint Preparation Is Essential for Wall Painting
Before using the sprayer, the mason emphasizes the importance of proper preparation. The paint should be strained to avoid clumps that could clog the equipment.
If it’s too thick, it can be diluted with water, as long as the manufacturer allows this on the label.
Another essential point of the technique is the cleaning of the surface. Therefore, removing dust, dirt, and residue ensures better adherence and protection of the wall.
How to Use the Sprayer Correctly?
The process is simple: the paint is placed in the sprayer, which works with manual pressure via a lever. When pressed, the paint sprays out, allowing continuous and level painting of the wall.
The secret, according to the mason, is to maintain a certain distance from the wall. This way, the paint does not drip, and the finish looks better. Thus, the sprayer delivers speed and efficiency.
According to the video, it is possible to paint an entire wall in less than an hour. For this reason, the sprayer becomes a reality for those seeking practicality.
The sprayer technique emerges as a modern, accessible, and effective solution for anyone wanting to renew their wall without wasting time.
Vamos a descubrir la pólvora mojada, eso lo hacía mi padre hace 45 años y estoy casi seguro que se lo vería hacer a alguien. Pintaba la casa y la nave con la sulfatadora.
Não explicou como de limpar o pulverizador (bomba de sulfatar,) depois do uso.
Tem como passar verniz casa de madeira?
Si claro, diluye el barniz con agua y listo!!! 😂😂😂