Many Job Openings in Resende, RJ for Working at Grupo Aethra, a Brazilian Company Providing Technology for the Automotive Industry in Latin America
In Resende – RJ there are many opportunities to meet the demand for high school and higher education positions. If you want to build a career at one of the largest service providers of technology for the automotive industry in Latin America, check out the opportunities below. Multinational Port Leader in Brazil Hiring Technicians for Operations at Porto do Açu
Read Also
- Marlin Navegação Hiring URGENTLY for 28 x 28 Embarkation on OSRV Vessel
- Selection Process at General Electric Factory Demands High School and Higher Education Positions
- American Multinational in the Offshore Oil and Gas Industry Looking for Technicians on this Day, 09
The Grupo Aethra is a Brazilian company with five thousand employees and 13 units. It has accumulated experience over more than four decades, serving the main automotive manufacturers in the country, and is one of the largest suppliers of high-tech services and products for the automotive industry in Brazil and Latin America.
-
In just three hours, a natural stone floor transforms the entrance of the house with an organic effect, immediate drainage, and a sophisticated non-slip finish that doesn’t puddle water, dries quickly, and impresses with the final result.
-
Future profession with immediate earnings: Specialist reveals how a solar energy technician earns R$ 8,000 per month by taking advantage of the explosion in demand across the entire country.
-
Work from 8:30 AM to 5:30 PM with a 1-hour break at Sicredi as a Customer Service Assistant and receive a salary + benefits such as life insurance, dental plan, partnerships, Gympass, and much more in job openings across various states.
-
Subsea7 has job openings: the company has offshore and onshore positions available in 2026 for operators, pilots, supervisors, engineers, and much more.
See Below All Job Openings Available Today to Work in a Service Industry in Resende, RJ
Dimensional Analyst – Quality (Application until 03/11/2020)
Requirements: Bachelor’s degree in Administration or Engineering; 3 years of experience in the role; availability of hours; metrology course; knowledge of dimensional coordinates and reading technical drawings; knowledge of English; MBA or graduate studies (desired).
Ultrasonic Inspector – (Application until 03/11/2020)
Requirements: Bachelor’s degree in Administration or Engineering; 2 years of experience in the role; availability of hours; metrology course; knowledge of dimensional coordinates and reading technical drawings; ultrasonic inspection course of the ultralog equipment; knowledge of English; MBA or graduate studies (desired).
Receiving Inspector – (Application until 03/11/2020)
Requirements: Bachelor’s degree in Administration or Engineering; 1 year of experience in the role; availability of hours; metrology course; knowledge of dimensional coordinates and reading technical drawings and Office suite.
Process Technician – (Application until 03/11/2020)
Requirements: Bachelor’s degree in Engineering, Process Management or Production; 3 years of experience in the role in the automotive manufacturing area; availability of hours; knowledge of resistance spot/weld projection processes, MIG and MAG welding processes, glue application process; Lean Manufacturing tools, FMEA, KPIs, reading and interpretation of drawings and standards; mapping of operational procedures and time study, basic knowledge of English and process and quality tools.
Logistics Planning Technician – (Application until 03/11/2020)
Requirements: Bachelor’s degree in Administration or Technology in Logistics (completed or in progress); minimum experience of 2 years in the role; availability of hours; knowledge of SAP system, Office suite and advanced Excel.
Materials Controller – (Application until 03/11/2020)
Requirements: Bachelor’s degree in Administration, Logistics, Engineering or related areas (completed or in progress); 1 year of experience in the role; availability of hours; Office suite and advanced Excel; Power BI, Power Query and macros (will be a differential).
Maintenance Supervisor – (Application until 03/11/2020)
Requirements: Bachelor’s degree in Administration, Engineering or related areas; 3 years of experience in the role; availability of hours; reading and interpretation of electrical and pneumatic diagrams; knowledge in programming with ControlLogix5000, RSLogix5000, RSView, PanelView, FactoryTalk (Rockwell) software; knowledge in PLC programming; programming and maintenance of KUKA robots.
Maintenance Analyst – (Application until 03/11/2020)
Requirements: Bachelor’s degree in Administration, Engineering or related areas; 3 years of experience in the role; availability of hours; reading and interpretation of electrical and pneumatic diagrams; knowledge in programming with ControlLogix5000, RSLogix5000, RSView, PanelView, FactoryTalk (Rockwell) software; knowledge in PLC programming; programming and maintenance of KUKA robots.
Electro-electronic Technician – (Application until 03/11/2020)
Requirements: Technical degree in Electrical, Electronics, Electrotechnics, Mechatronics or Automation; 3 years of experience in the role; availability of hours; reading and interpretation of electrical and pneumatic diagrams; desirable knowledge in industrial automation, programming and maintenance of KUKA robots and maintenance of welding equipment.
Welding Technician – (Application until 03/11/2020)
Requirements: Technical degree in Electrical, Electronics, Electrotechnics, Mechatronics, Automation or Mechanics; 3 years of experience in the role; availability of hours; reading and interpretation of electrical and pneumatic diagrams; desirable knowledge in programming and welding software and in calibration software for servbox.
Maintenance Mechanic – (Application until 03/11/2020)
Requirements: Technical degree in Mechanics, Mechatronics, or Electromechanics; 3 years of experience in the role; availability of hours; deep technical knowledge in mechanics, pneumatics, and hydraulics; welding clamps during, Bucker saw welding machines, Fronius welding machines, glue machines from Atlas Copco and Intec, balancers, and hoists.
Toolmaker – (Application until 03/11/2020)
Requirements: Technical degree in Mechanics, Mechatronics, Electromechanics or Metallurgy; 3 years of experience in the role; availability of hours; general knowledge in machining, metrology, and technical drawing; knowledge in mechanics, pneumatics, and hydraulics.
Application for Aethra RJ Positions
If you are a resident of RJ and are interested in any of the positions above, send your resume indicating the job title in the subject line of the email to amanda.nogueira@aethra.com.br

Seja o primeiro a reagir!