Research from the Federal University of Lavras calculated 1,340 kilograms of CO₂ equivalent per metric ton of sustainable fuel produced from macauba pulp oil. A subsequent analysis of six technology scenarios found emissions reductions of 64% to 90% compared with the fossil-fuel benchmark.
Sustainable aviation fuel made from macauba pulp oil showed a 65% reduction in greenhouse gas emissions compared with the fossil fuel used as a benchmark by researchers at the Federal University of Lavras (UFLA) in Brazil.
The result appears in the paper presented at UFLA’s 34th Graduate Studies Congress, which calculated emissions of 1,340 kilograms of carbon dioxide equivalent per metric ton of SAF in the system analyzed.
-
Ethanol Prices Rise 2.28% in a Week, Reaching R$ 4.04 Nationally as 14 States See Increases While São Paulo Averaged R$ 3.76 per Liter
-
After Falling 17.3% Through June, Biodiesel Rebounds with 9.5% Rise to R$ 5,362 per m³ as B15 Fills 15% of Brazil’s Diesel Market
-
Comgás Opens Doors Previously Reserved for Large Industries: Biometane Reaches SMEs, Network Receives Nearly R$ 10 Billion, Volume Could Jump to 1 Million m³ Daily
-
ANP Updates RenovaBio Targets for New Distributors, Sets Implementation for January 2027
The research was conducted by Juliano Vilela Oliveira, with contributions from Adriano Viana Ensinas and Marcio Montagnana Vicente Leme. The group specifically assessed sustainable aviation fuel made from oil extracted from macauba pulp.
The 65% figure reflects the conditions considered in the study and does not mean that all fuel made from macauba will automatically achieve the same reduction. Performance depends on the assumptions used and the technological configuration considered across the production chain.
Assessment covers different stages of the chain
To measure environmental impact, the researchers used a life cycle assessment, an approach that considers the different stages involved in producing and using fuel. The method allows the renewable alternative to be compared with the fossil benchmark beyond the agricultural origin of the feedstock.
The analysis followed ISO 14040 and ISO 14044 standards and was modeled in SimaPro software. The functional unit was one metric ton of SAF, while the study boundary was defined using a cradle-to-grave model, covering the stages considered through final use.
Environmental impacts were calculated using the ReCiPe 2016 Midpoint method. This framework incorporates the effects of the stages included in the system and prevents the environmental advantage from being attributed solely to the plant-based origin of the input or to the fuel’s end use.
For that reason, the 1,340 kilograms of CO₂ equivalent per metric ton do not represent zero emissions. The figure expresses the impact calculated for the system studied and serves as the basis for the comparison that found a 65% reduction relative to the fossil-fuel benchmark.
The choice of macauba also brings agricultural production into the supply chain for aviation fuels. Oil extracted from the pulp serves as feedstock for a production pathway aimed at a sector where direct electrification faces greater limitations than in other modes of transport.
The UFLA paper presents sustainable aviation fuels, known by the acronym SAF, as an option for reducing emissions associated with air travel. The authors also note that aviation accounts for about 2% of global anthropogenic emissions of CO₂ equivalent.
Life cycle assessment helps distinguish between two questions. One is whether an agricultural feedstock can be turned into fuel for aviation; the other is whether the alternative retains an environmental advantage when different stages of the supply chain are included in the calculation.
Six scenarios broadened the comparison
The same line of research advanced in 2026 with an assessment of SAF made from macauba grown on degraded pastureland. The paper, presented at the European Biomass Conference and Exhibition, compared six technology scenarios to measure how different configurations affected the emissions balance.
In the abstract published by EUBCE 2026, the analysis retained key methodological elements from the earlier study, including ISO 14040 and ISO 14044 standards, the use of SimaPro and a functional unit of one ton of fuel consumed.
Emissions calculated across the six scenarios ranged from 1,380 to 374 kilograms of CO₂ equivalent per ton of SAF. Compared with the conventional fuel used as a benchmark, reductions ranged from 64% to 90%.
The variation shows that the percentage achieved is not an inherent property of macauba. Differences in the assumptions for cultivation, processing and technologies incorporated into the supply chain can significantly affect the calculated environmental performance of fuel produced from the same feedstock.
In the six scenarios presented in the later study, however, emissions remained below the fossil-fuel benchmark used by the researchers. The analysis expanded on the initial finding by quantifying how different production configurations can change the environmental balance of macauba-derived SAF.
The pathway analyzed links agricultural production, energy processing and fuel production for a sector with specific decarbonization constraints. This connection makes it possible to assess macauba as a feedstock for SAF without treating the results for one specific configuration as guaranteed performance for every production chain.
The study presented at a congress of the Federal University of Lavras (UFLA) in Brazil received financial support from CAPES, CNPq and FAPEMIG. The later comparison across six scenarios added a practical reference point to the research: the calculated environmental benefit varies with the technological and production choices made throughout the supply chain.
