The engine used in the Hércules 9.0 spreader can run on HVO, a biofuel, without changes to the fuel system; the speed and fuel-consumption gains reported by Volvo Penta come from integrating the D8 with the machine, while the biofuel reduces the share of fossil fuel.
HVO, or hydrotreated vegetable oil, is not responsible for the fuel-consumption gains reported for the Hércules 9.0. Those results stem from integrating the Volvo Penta D8 engine with the machine; the renewable fuel offers the option to reduce the share of fossil diesel without changing the powertrain.
Volvo Penta reports that the configuration increased working speed by up to 15% and reduced fuel consumption by up to 20%, depending on operating conditions. The manufacturer attributes the results to high torque available at lower engine speeds and to the integration of the engine with the machine.
-
Brazilian Ethanol-Powered Prototype Reaches 521 Kilometers per Liter in Efficiency Competition as UTFPR Team Tests Engineering Solutions
-
Brazil’s lower house advances bill proposing ethanol and other renewable fuels for federal vehicles; measure must clear four more committees
-
65% Emissions Reduction: UFLA Study Shows Macauba Could Enhance Aviation with SAF, Lower Emissions, and Bridge Agriculture with Clean Energy
-
Ethanol Prices Rise 2.28% in a Week, Reaching R$ 4.04 Nationally as 14 States See Increases While São Paulo Averaged R$ 3.76 per Liter
How HVO works in the D8 engine
HVO stands for hydrotreated vegetable oil, a paraffinic biofuel made by processing vegetable oils and waste fats. On its page about alternative fuels, Volvo Penta says the product meets the EN 15940 standard and can directly replace diesel in compatible engines.
In the HVO100 version, the biofuel is used without being blended with fossil diesel. The company says its diesel engines manufactured since 2016 can run on HVO without modifications. This includes the D8 family used in off-highway applications and requires no changes to the installed fuel system.
This is known in the industry as a drop-in application: an alternative fuel replaces conventional fuel in approved equipment without requiring structural changes to the powertrain. For farm operations, this means the team can keep using the engine, fuel system and maintenance procedures already in place.
The same engine can also continue to run on conventional diesel or diesel-HVO blends. This flexibility reduces the need to tie operations to a single fueling option when HVO is unavailable in a particular region or at a particular farm.
Hércules 9.0 performance
The Hércules 9.0 is a self-propelled applicator designed to spread agricultural inputs and perform intensive work. In the configuration evaluated by the manufacturer, the D8 delivers high torque at lower engine speeds, reducing the need to keep the engine running at high speeds continuously.
Volvo Penta links this configuration to lower fuel consumption and noise levels during operation. Steady torque also helps maintain the machine’s speed, which is important for distributing inputs evenly during application.
The performance figures should be kept separate from the environmental benefit attributed to HVO. The reported fuel savings result from the engine-machine configuration, while HVO compatibility allows the fuel source to change without replacing the architecture responsible for operational performance.
Before series production, 11 Hércules 9.0 pilot units were delivered to customers in Brazil in 2025. The machines were monitored under different working conditions to assess performance and reliability, ahead of the start of series production in 2026.
The equipment was also showcased at Agrishow 2026 in Ribeirão Preto, in the state of São Paulo. The exhibition took place after the validation phase, presenting a configuration that had already been monitored in agricultural operations in Brazil.
What changes with renewable fuel
The main difference between conventional diesel and HVO is the fuel’s origin. While fossil diesel is derived from petroleum, HVO can be produced from vegetable oils and waste fats that undergo industrial processing, while retaining properties compatible with approved diesel engines.
Volvo Penta says using HVO100 can reduce fossil carbon dioxide emissions by up to 90% compared with conventional diesel. The percentage depends on the feedstock and production process, so it does not represent a fixed reduction for every operation.
HVO also does not turn the equipment into a zero-emission machine, because the fuel is still burned in an internal combustion engine. The benefit cited by the manufacturer is linked to the smaller share of fossil-origin carbon in the fuel cycle, not to eliminating emissions during operation.
For heavy equipment, compatibility offers an alternative to technologies that may require more extensive changes to propulsion, storage or refueling. In the Hércules 9.0, the diesel powertrain remains in place, while the fuel can be changed depending on availability and the operating conditions approved for the application.
Using a renewable fuel in an already compatible engine also enables a transition that does not depend on immediately replacing all combustion technology. In large machines, this makes it possible to incorporate another energy source while preserving equipment, systems and procedures already familiar to operation and maintenance crews.
Practical adoption depends on access to HVO where the machine operates. When the renewable fuel is available, the same engine can use it without conversion; when it is not, compatibility with diesel is maintained, allowing operations to continue without requiring dedicated infrastructure on the equipment.
