Wind Energy: Nordex, The Leader in Turbine Production for Wind Farms, Will Supply AES Brazil with More Than 65 N163/5.X Turbines from the Delta4000 Series
AES Brazil has once again contracted the German multinational Nordex to manufacture and install 55 N163/5.X turbines. After the order of 314 MW for the Cajuína wind farm, totaling 313.5 MW, in June 2021, AES ordered this week an additional 65 N163/5.X turbines with a total volume of 370 MW for the “Cajuína 2” extension phase.
Read Also
- WEG, One of the Largest Manufacturers of Turbines and Electric Motors in the World, Delivers Giant Transformer Measuring 10.1 Meters Tall and Weighing 271.1 Tons to the Neoenergia Oiti Wind Complex in Northeastern Brazil
- Hydrogen and Biodiesel Gas Combustion Turbines for Solar Backup at Siemens Energy’s Plant Promise to Revolutionize Renewable Energy Generation Worldwide
- WEG and Engie, the Second Largest in the Energy Sector, Complete Installation of the Wind Turbine of the First National Wind Generator
- Multinational Leader in Blade Production for Wind Turbines, Aeris Energy, Plans to Build a Third Factory in Ceará
- General Electric Presents Giant Floating Turbine That Promises to Revolutionize the Implementation of Wind Energy Worldwide
- President of Vestas, the Global Leader in Wind Turbine Production, Visits Ceará to Learn About the Infrastructure of the Pecém Industrial and Port Complex
- The World’s Largest Wind Energy Manufacturer Will Recover and Reuse All Turbine Blades from Its Global Portfolio of Onshore and Offshore Wind Farms After Decommissioning
The contract once again includes service for the turbines for an initial period of five years, with several options to extend up to 20 years.
“Cajuína 2” is part of the Cajuína Wind Complex, located in the state of Rio Grande do Norte, in the municipality of Lajes. Constant average wind speeds of approximately 9.5 m/s give the site a high capacity factor.
-
Viaduct used every day by cars, buses, and pedestrians in the center of a São Paulo city becomes a legal case after a report indicates “imminent danger,” cracks, corrosion, and high lethality risk.
-
Windows without a prison-like appearance gain momentum in 2026 and promise to completely transform residential facades with more natural lighting, discreet security, increased property value, and a modern look without the burden of the old iron bars that dominated Brazilian homes for decades.
-
How much does it cost to make a radier? A shallow foundation can speed up the construction and reduce stages, but poorly compacted soil, excess load, and design errors can turn the concrete slab into cracks, structural settlements, and much higher expenses later on.
-
Goodbye steel rebar? Scientists create 3D-printed plastic reinforcement that “bites” into concrete, prevents corrosion, and could change beams, slabs, and bridges in civil construction.
The turbines are expected to be installed in the summer of 2022 and will be supplied in a specific project operation mode of 5.7 MW. The Nordex Group will manufacture the poles, most of the nacelles, the 120-meter concrete towers, and the rotor blades in Brazil.
Giant 80-Meter Wind Blade, Manufactured by Aeris Energy for Nordex – One of the Largest Wind Turbine Manufacturers in the World – Sets Sail from the Port of Pecém to Europe
The Pecém port complex in Ceará celebrates the record shipment of a giant 80.1-meter wind blade for the German Nordex — one of the largest wind turbine manufacturers in the world!
The size of the wind blade (or propeller) manufactured by Aeris Energy for Nordex is impressive. The shipment of the first unit of this giant — the largest wind blade ever produced in the Southern Hemisphere – involved a specialized operation. The more than 80 meters in length required the involvement of various professionals, from manufacturing to transportation to the Port of Pecém, in Ceará.
Blade-Less Turbines from Vortex Could Revolutionize Wind Farms and Change the World of Renewable Energy
Vortex Bladeless, a technology startup based in Spain, is developing wind energy turbines that do not require blades (or propellers). One goal is to use these turbines in urban and residential spaces, where the impact of wind farms would be too great. Similar to a “giant straw,” according to its creators, it is designed to change the world of renewable energy.
Blade-less turbines (or propellers) could be the future of wind energy and renewable energy. Vortex Bladeless claims that the turbine poses no danger to bird migration patterns or wildlife, especially if used in urban settings. Additionally, it states that the noise created would be at a frequency practically undetectable by humans.


Be the first to react!